Bridget Black Color Model Kit: Build Guide and Tips

Quick answer

Assemble the GUILTY GEAR -STRIVE- Bridget Articulated Plastic Model Kit BLACK COLOR Ver. by carefully removing parts from the runners, cleaning nubs, and snapping joints together. Follow these steps for a clean build with full articulation.

Build steps

1. 1. Sort and inspect parts: Lay out all runners and identify each part number against the manual. Check for any loose parts or damage before cutting. Missing or damaged parts are easier to report before you start cutting.
2. 2. Cut parts from runners: Use side cutters to snip each part away from the runner, leaving a small nub. Avoid cutting flush to the part to prevent stress marks. Cutting too close can leave white stress marks on dark plastic. Leave 1–2 mm of gate material.
3. 3. Clean nubs with a hobby knife: Trim the remaining nub with a sharp hobby knife, shaving it down in thin passes. Do not gouge the plastic. Dark plastic hides shallow knife marks, but deep cuts will stand out. Go slowly.
4. 4. Sand smooth if needed: If the nub area feels rough, use a fine sanding stick (600–1000 grit) to blend it. Wipe dust off with a soft cloth. Over-sanding can create a dull spot. Stop as soon as the surface feels even.
5. 5. Assemble the torso and head: Follow the manual to snap the torso halves together, then attach the head. Ensure the neck joint clicks fully into place. A loose neck joint will make the head wobble. Press firmly until you hear or feel the click.
6. 6. Build the arms and attach them: Assemble each arm at the shoulder, elbow, and hand. Test the range of motion before attaching to the torso. If a joint is too tight, gently sand the peg. Do not force it or the plastic may crack.
7. 7. Build the legs and attach them: Assemble each leg at the hip, knee, and ankle. Attach to the torso and check that the figure stands evenly. Uneven leg assembly can cause the figure to lean. Place on a flat surface to check balance.

Product facts

• GUILTY GEAR -STRIVE- - Bridget Articulated Plastic Model Kit BLACK COLOR Ver. Figure: This BLACK COLOR Ver. retains the sculpting and articulation of the original version while using the popular black color scheme from the game. You get the same posability as the standard version, but the dark finish gives Bridget a more aggressive, game-accurate look.