Nendoroid Nobunaga Shimazaki: Display and Care FAQ
By Good Smile US | Published: 2026-11-03
Category: Produktbewertungen
Answers to common questions about displaying, handling, and maintaining the AONI PRODUCTION Nendoroid Nobunaga Shimazaki figure, including face plate care and voice unit setup.
Quick answer
Treat this voice actor Nendoroid like any other figure for display and posing, but handle the voice audio player and battery compartment with extra care. Swap face plates gently, keep the stand stable, and remove the battery during long-term storage.
Why the voice unit changes your care routine
The AONI PRODUCTION Nendoroid Nobunaga Shimazaki includes a built-in voice audio player that requires a CR1632 battery (sold separately). That small battery compartment is the main difference from a standard Nendoroid: you need to open it carefully, avoid touching the contacts, and remember to remove the battery if the figure will sit unused for months. The voice clips are a nice display feature, but they should not dictate how often you handle the figure. Keep the battery fresh only when you plan to use the voice function.
Face plate care without wearing out the joints
The figure comes with multiple face plates, so you will likely swap expressions more often than with a single-face Nendoroid. The key is to support the head from behind while you gently pull the front plate away, rather than twisting it. Avoid pulling on the hair pieces to remove a face plate. If a plate feels stuck, check that the small tab is aligned before applying pressure. Repeated rough swaps can loosen the peg, so slow down and use the pad of your thumb.
Nendoroid Nobunaga Shimazaki care and display FAQ
- How do I install the battery for the voice audio player?
- Open the battery compartment gently, insert one CR1632 battery with the correct polarity, and close the cover until it clicks. Do not force the cover. If the voice does not play, check the battery orientation and that the battery is new. Keep a spare CR1632 battery on hand if you use the voice function often.
- What is the safest way to swap face plates?
- Hold the head steady from the back, then ease the front face plate off by pulling straight forward. Align the new plate's tab with the slot before pressing it into place. Avoid pulling on the hair or neck joint. Swap face plates over a soft cloth so a dropped plate does not chip.
- How should I set up the stand for display?
- Attach the stand arm to the back of the figure using the designated hole, then adjust the arm angle before tightening. Place the stand on a level surface. For dynamic poses, keep the figure's center of gravity over the base. Recheck the stand arm angle after moving the figure.
- Can I leave the battery in during long-term storage?
- Remove the CR1632 battery if you will not use the voice function for several weeks or more. Store the battery separately in a dry place, and keep the figure away from heat and direct sunlight. Set a reminder to remove the battery before packing the figure away.
- How do I clean the figure without damaging the voice unit?
- Use a soft, dry cloth or a gentle brush to dust the figure. Do not use water, solvents, or compressed air near the battery compartment or speaker openings. If the face plates look smudged, wipe them with a dry microfiber cloth. Never spray cleaning liquid directly on the figure.
Product facts
- AONI PRODUCTION - Nendoroid Nobunaga Shimazaki Figure: Includes a voice audio player that requires one CR1632 battery (sold separately). Plan to buy the battery before you display the figure if you want to use the voice clips right away.
AONI PRODUCTION - Nendoroid Nobunaga Shimazaki Figure
